kemet emc filters 1 flld3 pv high - current 3 - phase emc filter overview the three phase filter series is intended to be used in energy conversion inverter systems (e.g. photo voltaic and wind power), between the inverter and the line or in motor drive systems . the filters are optimized for geometry and power loss. as the capacitance company, kemet is only using high quality capacitors in its filter series. technical specifications rated voltage 520 va c rated current 150 C 2500 a leakage current < 5 ma *) rated temperature 50 c temperature range - 40c to +100c climate category 40/100/21 voltage test p - > p 225 0 vdc p - > e 30 00 vdc the flle2pv - series is designed according to iec/en 60939 and ul 1283. *) maximum leakage current under normal operating conditions. if two phases are interrupted, leakage current can be much higher. typical insertion loss 150 to 250 a 320 to 1000 a 1600 and 2500 a filter rated current @ 50 c (a) power loss @ 25c/dc (w) weight (kg) flld3150apvi2 150 25 6 flld3180apvi2 180 35 6 flld3250apvi2 250 45 7 FLLD3320APVI1 320 15 10 flld3400apvi1 400 25 10 flld3600apvi1 600 40 11 flld3800apvi1 800 50 17 flld31k0apv1 1000 75 17 flld31k6apvi1 1600 130 26 flld32k5apvi1 2500 250 55 l1 l2 l3 pe line l1 l2 l3 pe load 0.01 0.1 1 10 100 mhz 0 20 40 60 80 100 db sym asym 0.01 0.1 1 10 100 mhz 0 20 40 60 80 100 db sym asym 0.01 0.1 1 10 100 mhz 0 20 40 60 80 100 db sym asym
kemet emc filters 2 flld3 pv high - current 3 - phase emc filter mechanical dimensions flld3 pvi1 busbar connections flld3 pvi2 threaded terminals 320 to 1000a 1600 a 2500 a filter dimensions in mm l w h l1 w1 w2 u x y z i j k n m flld3150apvi2 300 160 120 120 185 210 50 m10 flld3180apvi2 300 160 120 120 185 210 50 m10 flld3250apvi2 300 180 125 120 205 230 55 m12 FLLD3320APVI1 300 210 115 120 235 260 60 6 25 45 15 10.5 m12 flld3400apvi1 300 210 115 120 235 206 60 6 25 45 15 10.5 m12 flld3600apvi1 300 210 135 120 235 260 60 8 25 45 15 10.5 m12 flld3800apvi1 350 230 170 145 255 280 60 8 40 55 20 14 m12 flld31k0apvi1 350 230 170 145 255 280 60 8 40 55 20 14 m12 flld31k6apvi1 400 250 170 170 275 300 60 10 60 95 17 26 26 14 m12 flld32k5apvi1 600 300 200 250 330 370 100 15 100 100 20 35 35 14 m16 legal disclaimer notice all product specifications, statements, information and data (collectively, the information) are subject to change without notice. all information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on our knowl edge of typical operating conditions for such applications, but are not intended to constitute C and we specifically disclaim C any warranty concerning suitability for a specific cust omer application or use. this information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their applications. any technical advice inferred from this information or otherwise p rov ided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained. although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that failure of an electrical component does not result in a risk of personal injury or property damage. although all product - related warnings, cautions a nd notes must be observed , the customer should not assume that all safety measures are indicated or that other measures may not be required l w h u y x z w1 w2 z l1 l1 ?12 (x6) l w h m u l1 l1 w1 w2 u u k k j j i i i ? n ? n ? n
|
